JWST (James Webb Space Telescope)
JWST (James Webb Space Telescope)
JWST is an orbiting optical observatory and a key element in NASA's Origins Program, optimized for observations in the infrared region of the electromagnetic spectrum. It is considered the successor mission of HST (Hubble Space Telescope) while operating over a different spectral range. At the NIR and MWIR wavelengths, it benefits from operating at intrinsically lower backgrounds than any comparably sized telescope on the ground. JWST, previously known as NGST (Next Generation Space Telescope), will be the premier space facility for astronomers in the decade following its launch. The overall objectives are to study the first stars and galaxies after the big bang. Major science goals (themes) of the mission are to find answers to the following questions: 1) 2)
• What is the shape of the Universe?
• How do galaxies evolve?
• How do stars and planetary systems form and interact?
• How did the Universe built up its present chemical/elemental composition?
• What is the nature of dark matter?
The radiation from the very distant objects to be observed is practically all in the infrared region. Many of the early events happened when the Universe was between 1 million and 1 billion years old, a period that is not known to earthlings (the dark ages of the Universe). To accomplish the goals of the science themes, the main JWST design requirement calls for the detection of objects up to 400 times fainter than those observable by current ground-based or spaceborne observatories.
Historical background: Large next-generation projects with high-performance observation requirements take about two decades (and more) from first studies to launch. Initial planning for the new mission started in 1989 (visions, conceptual studies). The goal was to have a successor mission for HST ready for launch well before 2010.
In the mid-1990s, a telescope design with an 8 m aperture was considered. The challenge was to come up with a lower cost for the large telescope than for previous much smaller space telescopes. This involved conceptual studies by industry. In 1996, a committee report was written, based on these studies: “Next Generation Space Telescope, Visiting a Time When Galaxies Were Young.” This report established also a roadmap to NGST activities, defining the new building blocks and to search for enabling technologies and concepts - in particular in the fields of large-aperture lightweight mirrors that are actively controlled, of advanced detector designs, of suitable cooling techniques for all critical components, and of precision metrology to achieve the goal of measuring ultra precise stellar positions.
A broad range of talent on a national and international level and from many institutions, academia and industry was directly involved in the NGST detailed definition phase (Phase A) including simulations and feasibility studies. In 1997, an ad hoc Science Working Group was formed which came up with thematic science goals and developed a so-called “Design Reference Mission” (DRM), representing a hypothetical suite of key science observing programs [stating the expected physical properties (number density and brightness), the desired observation modes (wavelength band, spectral resolution, number of revisits), and a minimum operational life of 2.5 years to complete the mission] for NGST - which provided a yardstick for technology testing. DRM was and is the primary tool against which any JWST architectures are being measured. The shear complexity of the project and the performance requirements demanded a technology development and validation strategy to address and demonstrate a critical path to a workable design of the mission. 3) 4) 5) 6)
In 2000/1, the NGST project experienced a rescoping of the telescope size (from 8 m aperture to 6.5 m) to keep projected costs in bounds. There were also some technology maturity uncertainties.
The project started in 2002 with a Mission Definition Review. NASA began to realize that the critical technologies had reached a level of sufficient maturity to justify a go-ahead with the next phase of the project.
In September 2002, NASA renamed NGST to JWST (James Webb Space Telescope) in honor of James E. Webb (1906-1992), NASA's second administrator during the Apollo Program of the 1960s (1961-1968). At the same time in Sept. 2002, NASA awarded the prime contract of the JWST observatory development (spacecraft, telescope, integration and testing) to Northrop Grumman Space Technology (formerly TRW) of Redondo Beach, CA.
In the fall of 2003 ICR(Initial Confirmation Review) was given, starting the Phase B of the JWST project. The C/D Phase started in 2008.
The CDR (Critical Design Review) of the JWST (James Webb Space Telescope) is planned for December 2013 (Ref. 29).
Project partners: NASA leads an international partnership in the joint JWST mission that includes ESA (European Space Agency) and CSA (Canadian Space Agency). Both agencies (ESA, CSA) collaborated in the JWST project already at an early planning stage (1996). Aside from instrument contributions, ESA will also launch the JWST spacecraft on an Ariane 5 launcher as agreed to with NASA. NASA/GSFC is managing the JWST project, while STScI (Space Telescope Science Institute) of Baltimore, MD, is responsible for JWST science and mission operations, as well as ground station development (STScI is the same organization that is operating the Hubble Space Telescope). A formal JWST and LISA (Laser Interferometer Space Antenna) cooperation agreement between NASA and ESA was signed on June 18, 2007 at the International Paris Air Show at Le Bourget, France. 7) 8) 9) 10) 11)
A most interesting and valuable side effect of the technology development effort for JWST is that these new technologies will also be available to many other space projects (astronomy, space science, Earth observation, etc.) providing potentially a quantum step in observation performance.
The JWST mission concept is an ambitious and most challenging development program, requiring a lot of innovative technology introduction as well as conceptual breakthroughs on various levels to meet the proposed observational performances. The objectives of the science themes can only be met by a combination of a large-aperture telescope in space (6.5 m φ ), a very low detection temperature to eliminate noise, and an ideal observing environment (elimination of stray light).
The observatory will be shielded from the sun and Earth by a large deployable sunshade, the entire telescope assembly will be passively cooled to about 37 K, giving JWST exceptional performance in the near-infrared and mid-infrared wavebands. The baseline wavelength range for the instrumentation is 0.6 - 28 µm, and the telescope will be diffraction-limited above 2 µm. The sensitivity of the telescope will be limited only by the natural zodiacal background, and should exceed that of ground-based and other space-based observatories by factors of 10 to 100,000, depending on the wavelength and type of observation. The JWST observatory will have a 5 year design life (with a goal of 10 years of operations) and will not be serviceable by astronauts (as is Hubble). The total mass of JWST at launch is estimated to be 6,500 kg.
Like Hubble, the JWST will be used by a broad astronomical community to observe targets ranging from objects within our Solar System to the most remote galaxies seen during their formation in the early universe.
Major enabling technologies are:
• Large deployable and lightweight beryllium mirrors (a folding 6.5 meter mirror made up of 18 individual segments, adjustable by cryogenic actuators). To fit inside the launch vehicle, the large space telescope prime mirror must be folded in sections for launch, then unfolded (deployed) precisely into place after launch, making it the first segmented optical system deployed in space.
• Deployment of large structures. Once in space, the multilayer sunshield that was folded over the optics during launch will deploy to its full size and keep the telescope shadowed from the sun.
• Introduction of MEMS technology to the microshutter system of the NIRSpec instrument. The programmable microshutters to allow object selection for the spectrograph.
Overview of payload instruments:
• NIRCam (Near-Infrared Camera), funded by NASA with the University of Arizona as prime contractor. CSA is participating in the development of the NIRCam instrument.
• NIRSpec (Near-Infrared multi-object Spectrograph), funded by ESA with EADS Astrium GmbH as prime contractor (the detector arrays and a micro-shutter are supplied by NASA/GSFC)
• MIRI (Mid-Infrared Camera-Spectrograph) a joint instrument of JPL and ESA. The instrument (about 50%) is being provided by ESA member states, coordinated but not funded by ESA.
• FGS (Fine Guidance Sensor) with TFI (Tunable Filter Imager), funded by CSA (Canadian Space Agency)
Figure 2: Comparison of JWST light gathering power vs spectral range with Hubble and Spitzer telescopes (image credit: STScI) 13)
Launch: NASA is targeting Oct. 31, 2021, for the launch of the agency’s James Webb Space Telescope from French Guiana, due to impacts from the ongoing coronavirus (COVID-19) pandemic, as well as technical challenges. 14) The launch of the NASA/ESA/CSA James Webb Space Telescope (Webb) on an Ariane 5 rocket from Europe’s Spaceport in French Guiana is now planned for 31 October 2021. 15)
This decision is based on a recently completed schedule risk assessment of the remaining integration and test activities prior to launch. Previously, Webb was targeted to launch in March 2021.
Table 1: NASA statement of Release 18-019 of 27 March 2018 regarding the new launch target of May 2020 for JWST
Figure 3: James Webb Space Telescope Launch and Deployment (video credit: NASA, Northrop Grumman) 16)
Table 2: Independent Review Board of JWST 17)
• Dec. 17, 2015: The next great space observatory took a step closer this week when ESA signed the contract with Arianespace that will see the James Webb Space Telescope launched on an Ariane 5 rocket from Europe’s Spaceport in Kourou in October 2018. The contract includes a cleaner fairing and integration facility to avoid contaminating the sensitive telescope optics. 18)
- With a 6.5 m diameter telescope, the observatory must be launched folded up inside Ariane’s fairing. The 6.6 ton craft will begin unfolding shortly after launch, once en route to its operating position some 1.5 million km from Earth on the anti-sunward side.
The orbit of JWST has been selected to be at L2. The spacecraft will be in a Lissajous (or halo) orbit about the Lagrangian point L2. In the Sun‐Earth system the L2 point is on the rotating Sun-Earth axis about the same distance away as L1 (1.5 million km, representing 1/100 the distance from Earth to the Sun) but at the opposite side of the Earth. The L1 location is inside the Earth orbit while the L2 location is outside the Earth orbit.
The halo orbit of JWST is in a plane slightly out of the ecliptic plane. This orbit avoids Earth and moon eclipses of the sun. The halo orbit period is about 6 months. Nominal station keeping maneuvers will be performed every half orbit (i.e. in intervals of about 3 months).
Figure 4: Locations of the five Lagrangian points in the Sun-Earth system
The L2 location is considered to offer the most advantageous viewing for astronomical targets (looking toward the universe) due to nearly constant lighting conditions (minimum of stray light). Another advantage of the L2 location is that it offers a stable thermal environment. The telescope is kept in perpetual shadow by looking into the deep space direction. The deep space provides a 2.7 K black body radiation. This ideal heat sink is being used to provide the passive cooling for the payload to a temperature range of about 37 K, shielded from sunlight (entering the spacecraft from the opposite direction) by a five-layer sunshield [passive cooling is the most elegant and economical method available to obtain the required operating temperatures for infrared detection].
Figure 5: Overview of JWST trajectory to L2 (image credit: NASA)
Figure 6: Artist's rendering of the JWST observatory (image credit: NASA)
JWST deployment sequence:
During the transfer orbit to L2 different elements of the JWST will be deployed and commissioning will start. The observatory has five deployment stages involving the following elements: 19)
1) Deployment of spacecraft appendages (solar arrays, high gain antenna)
2) Deployment of the sunshield (unfolding 2 days after launch)
3) Extension of the tower
4) Deployment of the secondary mirror (positioned on a tripod structure)
5) Deployment of the primary mirror wings
The deployment of the solar arrays and the high gain antenna is scheduled for the first day to provide the capabilities of onboard power generation and a spacecraft communications link. The unfolding of the sunshield will occur two days after launch, while the timeline for secondary and primary mirror deployment is foreseen after four days. “First light” will occur about 28 days after launch, initiating wavefront sensing and control activities to align the mirror segments. Instrument checkout will start 37 days after launch, well before the final L2 orbit insertion is obtained after 106 days. This is being followed by full commissioning procedures expected to last until about 6 months after launch. 20)
Figure 7: Deployment sequence of the OTE (image credit: NASA, STScI)
The Observatory architecture is comprised of three elements: OTE (Optical Telescope Element), ISIM (Integrated Science Instrument Module), and the spacecraft (bus and sunshield). A key aspect of the JWST architecture is the use of semi-rigid primary mirror segments mounted on a very stable and rigid backplane composite structure. The architecture is referred to as “semi-rigid” because it has a modest amount of flexibility that allows for on-orbit compensation of segment-to-segment radius of curvature variations. 21) 22) 23) 24) 25) 26) 27) 28) 29)
Figure 8: The three elements of the JWST flight segment (image credit: NASA) 30)
Figure 9: The JWST spacecraft, reflecting the addition of the trim flap and the new solar panel array (image credit: NASA)
Table 3: Overview of key design features and benefits of the Observatory
Table 4: Overview of the predicted performance of the JWST observatory
OTE (Optical Telescope Element):
The OTE is of course the key element of the observatory with a primary mirror aperture diameter of 6.5 m. A lightweight design is mandatory to keep the launch costs in bounds. Early in the JWST program, an AMSD (Advanced Mirror System Demonstrator) project was launched to address the feasibility and readiness level of the required enabling technologies.
The following requirements were placed on JWST's optics (based on an “optical telescope element” study of 1996:
• The mirror should be sensitive to 1-5 µm (0.6-30 µm extended)
• It should be diffraction limited to 2 µm
• It will have to operate in the temperature range of 30-60 K
• It should have an areal density of < 15 kg/m2.
Figure 10: Isometric drawing of the OTE telescope structure (image credit: NASA, STScI)
The JWST prime contractor, NGAS (Northrop Grumman Aerospace Systems) in consultation with the JWST Telescope Team, selected the beryllium-based mirror technology design made by BATC (Ball Aerospace & Technologies Corporation) as the primary mirror material with the following features: 31) 32)
• 1.318 m point-to-point light-weighted beryllium semi-rigid mirror (element size)
• 13.4 kg/m2 beryllium substrate areal density
• 19.3 kg/m2 areal density for the mirror system - including mirror, reaction structure, flexures, and actuators
• A SBMD (Subscale Beryllium Model Demonstrator) element achieved a 19 nm rms “surface roughness” at 38 K.
Beryllium was chosen over glass as the mirror material because it is lighter and has a low coefficient of thermal expansion at cryogenic temperatures. Since JWST is an infrared telescope, it must operate at cryogenic temperatures (< 40 K) so that the heat of the telescope does not interfere with the radiation it captures. Beryllium mirrors have a heritage in past astronomy missions such as in IRAS (InfraRed Astronomical Satellite, launch Jan. 25, 1983), COBE (Cosmic Background Explorer, launch Nov. 18, 1989) and the Spitzer Space Telescope (launch Aug. 25, 2003). The material properties of beryllium are known to temperatures of 10 K.
Aside from its lightweight features, the primary mirror must be segmented, so that it can be folded up to fit into the nose cone of a rocket. Once on orbit, the telescope will be deployed, using motors to unfold the primary mirror and other important assemblies. Then the telescope will be cooled down from room temperature to about 37 K by the ambient environment on its way to L2 - a temperature change of about 300 K is experienced which obviously causes misalignments and figure errors of the optics system. Note: Passive cooling is attained by placing the observatory at L2 and keeping the telescope and its instrumentation in perpetual shadow by means of a large deployable sunshade.
The primary mirror design consists of 18 hexagonal segments (1.315 m flat-to-flat side), in two rings around the center, resulting in a 6.5 m flat-to-flat diameter with a collecting area of 25 m2. A TMA (Three Mirror Anastigmatic) design is employed with a Strehl ratio of ~0.84 at λ = 2 µm providing a very low background noise. The telescope has an effective f/number of f/16.67, and an effective focal length of 131.4 m.
The segments of the primary mirror act as a single mirror when properly phased relative to each other. The phasing is achieved via a 6 DoF (Degree of Freedom) rigid body motion of the individual segments, and an additional control for the segment mirror radius of curvature. The 18 segments have three separate segment types (A, B, C) with slightly different aspheric prescriptions depending on placement as shown in Figure 11. The numbers 1 to 6 represent the six-fold symmetry of the hexagonal packing of the primary mirror.
Figure 12 shows the rear portion of the mirror segments and the seven actuators. The architecture is “semi-rigid” because it has a modest amount of flexibility that allows for on-orbit compensation of segment-to-segment radius of curvature (ROC) variations. This ROC adjustment is made independent of any attachment to the backplane structure to prevent mirror distortion.
The six actuators providing rigid body motion are arranged in three bipods to form a kinematic attachment to the backplane. Each bipod attaches to a triangular shaped structure which is attached to the isogrid structure of the mirror segment. This structure spreads the loads over the surface of the mirror. The other end of the actuators attaches through a secondary structure and flexure to the backplane. The seventh actuator controls the segment radius of curvature and is independent of the rigid body actuators. The actuators operate at cryogenic and ambient temperatures, and have both coarse and fine positioning capability. This configuration enables simple rigid body motion of the segments without distorting the segment surface. 33)
Legend to Figure 11: JWST completes the gold coating of it's telescope mirrors with segment C1. A microscopically thin layer of gold maximizes the reflectivity of these mirrors to infrared light.
WFS&C (Wavefront Sensing and Control) subsystem: A WF&C semi-rigid structure is being used for phasing (to counteract the misalignments). WFS&C consists of actuators mounted on the telescope primary mirror segments and on the secondary mirror, to deform and displace the critical telescope optics in ways that are very effective in compensating the likely on-orbit deformations. The WFS&C software processes images from the cameras to measure the optical aberrations. The software then computes actuator commands to correct the aberrations.
Figure 13: Illustration of the OTE subsystems/assemblies (image credit: NASA, STScI) 34)
Operating temperatures: The large sunshade will protect the telescope from heating by direct sunlight, allowing it to cool down to temperatures of < 45 K. The near-infrared instruments will work at about 30 K through a passive cooling system. The mid-infrared detectors will work at a temperature of 7 K, using stored cryogen (active cooling).
Figure 15: As at the end of 2013, all 18 of the JWST primary mirror segment assemblies are complete and have arrived at Goddard, where they are being stored inside separate stainless steel shock-absorbing canisters until it is time for mirror assembly (image credit: NASA)
ISIM (Integrated Science Instrument Module)
The ISIM provides structure, environment, control electronics and data handling for three modular science instruments: NIRCam, NIRSpec, and MIRI, and the observatory FGS (Fine Guidance Sensor). ISIM is being provided by NASA/GSFC. In addition to designing the ISIM structure, NASA Goddard provides other infrastructure subsystems critical for the operation of the instruments, including the ISIM Thermal Control Subsystem; ISIM Control and Data Handling Subsystem; ISIM Remote Services Unit; ISIM Flight Software; ISIM Electronics Compartment, and ISIM Harness Assemblies. 35) 36) 37) 38) 39)
ISIM is a distributed system consisting of cold and warm modules.
• The cryogenic instrument module is integrated with the OTE and the sensor complement, all of which are passively cooled to the cryogenic temperature of 39 K. This passively cooled cryogenic (39 K) section houses the instruments NIRCam, NIRSpec, MIRI and the FGS (Fine Guidance Sensor). The MIRI instrument is further cooled by a cryocooler to 7 K.
• The second area is the IEC (ISIM Electronics Compartment), which provides the mounting surfaces and a thermally-controlled environment for the instrument control electronics (region 2 maintained at 298 K). The ICE package is mounted onto the exterior of the ISIM structure.
• The third area (warm module) is the ISIM Command and Data Handling (ICDH) subsystem, which includes ISIM flight software, and the MIRI cryocooler compressor and control electronics (region 3 maintained at 298 K). The warm region of ISIM is located in the spacecraft on the warm side of the Observatory. This more benign environment allows for relaxed thermal requirements on major portions of the electronics with higher power dissipation, and it avoids unnecessary heat loads in the cold section.
Figure 16: ISIM is the science instrument payload of JWST (image credit: NASA) 40)
Figure 17: Components of the integrated ISIM with the FGS mounted inside the structure (image credit: NASA)
Each ISIM instrument reimages the OTE focal plane onto its FPA (Focal Plane Array) assembly, allowing for independent selection of detector plate scale for sampling of the optical PSF (Point Spread Function). A fine steering mirror (FSM) is used for accurate optical pointing and image stabilization. The FSM is located at the image of the pupil, after the tertiary mirror but forward of the focal plane interface to the ISIM. The FSM, coupled with the low structural noise spacecraft, suppresses line-of-sight jitter to allow diffraction-limited performance at 2 µm. The V1, V2, and V3 coordinate systems are defined by the vertex of the primary mirror as shown in Figure 14.
The four scientific instruments onboard JWST are contained in the ISIM (Integrated Science Instrument Module) which is mounted to the BSF (Back Plane Support) behind the primary mirror. ISIM contains four instruments: MIRI,FGS/IRISS, NIRCam, and NIRSpec. The IEC (ISIM Electronics Compartment) is also mounted to the BSF and holds a number of high-power boxes, totaling 200 W of dissipation, at room temperature on the cold side of the sunshield. This is an order of magnitude above the summed dissipation of the remainder of the cold side. Its proximity to the cryogenic instruments is driven by the noise-sensitive science data that must be processed by electronics with the IEC. 41)
The IEC has been designed to hold room-temperature electronics boxes in close proximity to the cryogenic telescope and instrument module and to direct the 200 W dissipation so that is does not have a negative affect on the observatory performance. This is made possible through multiple radiative isolators in series, conductive isolation, and directional baffles. Analysis has shown that this design will meet the requirements levied on the IEC by the observatory, allowing the IEC to function as an integral part of the James Webb Space Telescope.
Figure 18: ISIM components within the Observatory (image credit: NASA)
Table 5: Overview of science instrument characteristics
The ISIM instruments are located in an off-axis position, which yield excellent image quality over the 9.4 arcminute field, as shown by the contours of residual wavefront error as a function of field location in Figure 21. The cold portion of the ISIM is integrated with the OTE.
Figure 19: Schematic diagram of the accommodation of the four science instruments in ISIM (image credit: NASA)
Figure 20: NASA engineers check out the unwrapped ISIM structure in a clean room in 2009 (image credit: NASA) 42)
Legend to Figure 21: Placement of the ISM instruments in the telescope field of view. The field of view of each instrument is fully contained within the instrument allocation regions. The numbers indicate the wavefront error contribution by the optical telescope element (in nm) at each location.
Legend to Figure 22: A high fidelity simulation of the JWST telescope beam is fed from below into the ISIM by an Optical SIMulator (OSIM) that is mounted on vibration isolators. The SES vacuum vessel is equipped with nitrogen and helium shrouds to enable testing at the 40 K nominal flight operating temperature. 43)
The ISIM structure and assembly has a total mass of ~ 1400 kg which is about 23% of the JWST mass.
• Summer 2015: The ISIM enters this final testing sequence in its full flight configuration. After some precursor integration and test activities, which included two very successful cryo-vacuum campaigns (called CV1-RR and CV2, the latter of which was in a nearly-final configuration), the ISIM underwent a series of activities to upgrade its instruments and systems to full flight readiness. These activities included: 44)
- Completion of the upgrade of the near-infrared detector arrays in NIRCam, NIRSpec, and FGS/NIRISS to a newer, more robust design that eliminates a dark current degradation mechanism suffered by the earlier generation arrays.
- Installation of new Microshutter Arrays in the NIRSpec with improved stability against the acoustic loads of launch.
- Installation of new grisms in the NIRISS instrument, including a new grism for exoplanet spectroscopy with 2-3 times higher throughput than the original optic.
- Upgraded electronics boards in several instruments for improved performance or reliability.
- Installation of the flight cold head of the MIRI cryocooler system (the Heat Exchanger Stage Assembly, mounted to the ISIM structure).
The first phase of this final environmental test sequence, vibration testing, was completed in June 2015, with vibration of the “ISIM prime” module. Sinusoidal sweep testing was carried out in each of three axes, with amplitudes up to ~2.5g in some frequency bands, in order to verify workmanship by subjecting the system to the low frequency structural dynamic spectrum of the launch environment.
Figure 23: The ISIM structure and flight instruments, re-integrated and ready for environmental testing (image credit: NASA, Chris Nunn)
Sensor complement: (NIRCam, NIRSpec, MIRI, FGS/NIRISS)
NIRCam (Near-Infrared Camera)
NIRCam funded by NASA with the University of Arizona as prime contractor (PI: Marcia J. Rieke). CSA is participating in the development of the NIRCam instrument. The industrial partner is Lockheed-Martin Advanced Technology Center, Palo Alto, CA. The NIRCam objectives are: 45) 46) 47) 48) 49) 50)
• To find “first light” sources. NIRCam surveys will become the backbone of the first light searches and for galaxy evolution studies.
• To assist the space telescope in initial (after deployment) and periodic alignment tests throughout the mission. This requires wavefront sensing to assure perfect alignment and shape of the different primary mirror segments.
• The camera also includes features for studying star formation in the Milky Way and for discovering and characterizing planets around other stars.
The various roles place additional constraints on the camera design. First, the camera must accommodate extra optics and pupil analyzers to enable the wavefront sensing. Secondly, the modules incorporating the wavefront sensing must be fully redundant as the mission depends critically on this functionality. Hence, the NIRCam design includes two identical imaging modules each of which includes dual filter wheels. The dual filter wheels are configured so that one wheel holds bandpass filters while the other wheel holds pupil analyzers thus permitting wavefront analysis as a function of wavelength.
NIRCam employs a compact refractive optics design using dichroics (to split the incoming radiation in 2 wavelengths) to enable simultaneous observation of a field at λ < 2.5 µm and at λ > 2.5 µm. The short wavelength module is Nyquist-sampled at 2 µm while the long wavelength module is Nyquist-sampled at 4 µm.
Table 6: Overview of the NIRCam capabilities
Table 7: NIRCam module characteristics
Figure 24: Schematic layout of a NIRCam imaging module (image credit: NASA)
Legend to Figure 25: An optical wedge in the pupil wheel brings the coronagraphic spots into the field of view. The spots are matched with Lyot stops.
Coronagraphy: To enable the coronagraphic imaging of nearby stars, each of the two identical optical trains in the instrument also contains a traditional focal plane coronagraphic mask plate held at a fixed distance from the FPAs (Focal Plane Assemblies), so that the coronagraph spots are always in focus at the detector plane. Each coronagraphic plate is transmissive, and contains a series of spots of different sizes to block the light from a bright object. Each coronagraphic plate also includes a neutral density spot to enable centroiding on bright stars, as well as point sources at each end that can send light through the optical train of the imager to enable internal alignment checks. Normally these coronagraphic plates are not in the optical path for the instrument, but they are selected by rotating into the beam a mild optical wedge that is mounted in the pupil wheel (Figure 25), which translates the image plane so that the coronagraphic masks are shifted onto the active detector area (Ref. 34).
Figure 26: Layout of a NIRCam imaging module (image credit: University of Arizona)
The NIRCam filters and pupil selections are given in Table 8. All of the camera's filter wheels are identical, 12 position dual wheels. NIRCam also includes a set of broadband filters whose wavelengths and widths have been carefully chosen to support accurate photometric redshift estimation.
Figure 27: Illustration of the NIRCam instrument (image credit: NASA)
The expected point-source sensitivity is ~3.5 nJy for wavelengths from 0.7 - 5 µm in a 100,000 second exposure at a SNR (Signal-to-Noise Ratio) of 10. All ten detectors arrays needed for NIRCam are using Teledyne Technologies (former Rockwell Scientific )HgCdTe 2k x 2k devices (HAWAII-2RG detector technology, also referred to as H2RG). The short wavelength bands will be sampled at 4096 x 4096 pixels (0.0317 arcsec/pixel), while the long wavelength bands are being sampled by 2048 x 2048 pixels (0.0648 arcsec/pixel). The focal plane array includes detector and cryogenic electronics. 51) 52)
Note: The term “Jy”
refers to the “Jansky,” the unit of radio‐wave emission
strength, in honor of Karl G. Jansky (1905‐1950) an American engineer
whose discovery of radio waves (1931) from an extraterrestrial source
inaugurated the development of radio astronomy. Jansky published his
findings in 1932 while working at Bell Telephone Laboratories in Murray
Figure 28: This new 2Kx2K pixel NIRCam sensor chip assembly incorporates improved barrier layers to increase the ground storage lifetime (image credit,NASA, Bernie Rauscher, “JWST Detector Update,” Ref. 43)
Legend to Figure 28: The Teledyne H2RG detectors are being used in 3 instruments of JWST, namely in NIRCam, NIRSpec, and in FGS/NIRISS.
The NIRCam coronagraph: Each NIRCam module will be equipped with a simple Lyot coronagraph consisting of a selection of focal plane occulters and pupil masks (Lyot stops). The requirements are:
1) Provide imaging to within 0.6 arcsec (4λ/D) of the star at λ = 4.6 μm and to within 0.3 arcsec at λ = 2.1 μm for the detection of extrasolar planets seen in emission.
2) Provide imaging to within 0.8 arcsec (6λ/D) of the star at λ = 4.3 μm, 0.64 arcsec at λ = 3.35 μm, and 0.4 arcsec at λ = 2.1 μm for observations of circumstellar disks seen in reflected light.
3) The occulters must be rigidly mounted and must not interfere with imaging during non-coronagraphic observations, requiring placement outside the normal field of view.
4) Ideally, suppress the diffraction pattern produced by the JWST obscurations to a level equal to or below the scattered light created by the uncorrectable optical surface errors, given the budgeted ~131 nm rms of wavefront error prior to the coronagraphic occulters.
5) Provide sufficient throughput to image 1 Gyr-old Jupiter-mass planets around the nearest late-type stars with 1-2 hours of exposure time.
6) Tolerate 2% pupil misalignments due to pupil wheel positioning errors and telescope-to-instrument rotational offsets.
7) Tolerate 10-40 marcsec (milliarcsecond) of pointing error at λ = 4.6 μm without a significant decrease in performance.
• Jan. 6, 2015: The MIRCam instrument surpassed expectations during tests in late 2014. NIRCam performed significantly better than requirements during the first integrated, cryogenic testing program at GSFC (Goddard Space Flight Center), Maryland. 53)
- In April 2014, NASA installed the instrument alongside others in the ISIM (Integrated Science Instrument Module), which finished cryogenic and vacuum testing late last year.
• Flight NIRCam ready for integration into ISIM (Ref. 176).
NIRSpec (Near-Infrared multi-object Spectrograph)
NIRSpec is funded by ESA (Project Scientist: Peter Jakobsen of ESA/ESTEC) with Airbus Defince and Space (formerly EADS Astrium GmbH) as prime instrument contractor (the detector arrays and a microshutter are supplied by NASA/GSFC). The key objectives are the study of galaxy formation, clustering, chemical abundances, star formation, and kinematics, as well as active galactic nuclei, young stellar clusters, and measurements of the initial mass function of stars (IMF). 54) 55) 56) 57) 58) 59) 60)
The region of sky to be observed is transferred from the JWST optical telescope element (OTE) to the spectrograph aperture focal plane (AFP) by a pick-off mirror (POM) and a system of foreoptics which includes a filter wheel for selecting band passes and introducing internal calibration sources. The nominal scale at the AFP is 2.516 arcsec/mm.
Figure 29: CAD layout of the NIRSpec instrument with outer shroud removed (image credit: ESA)
The NIRSpec baseline design uses a micro-electromechanical system (MEMS), consisting of an array of about 1000 x 500 microshutters, to select hundreds of different objects in a single field of view.
The NIRSpec instrument will be the first slit-based astronomical MOS (Multi-Object Spectrograph) in space providing spectra of faint objects over the near-infrared 1.0-5.0 µm wavelength range at spectral resolutions of R=100, R=1000 and R=2700. The instrument's all-reflective wide-field optics, together with its novel MEMS-based programmable microshutter array slit selection device and its large format low-noise HgCdTe detector arrays (2 detectors of 2 k x 2 k pixels), combine to allow simultaneous observations of > 100 objects within a FOV of 3.4 arcmin x 3.6 arcmin with unprecedented sensitivity. 61) 62) 63)
Figure 30: Schematic layout of the NIRSpec optics (image credit: ESA)
NIRSpec is required to select various spectral band widths and split these up into its comprised wavelengths. These functions are achieved by the FWA (Filter Wheel Assembly) and the GWA (Grating Wheel Assembly). The filters of the FWA select a different bandwidth of the spectrum each while the gratings on the GWA yield specific diffractive characteristic for spectral segmentation. A high spectral sensitivity as well as the ability to detect the spectra of various objects at the same time result in high requirements regarding the positioning accuracy of the optics of both mechanisms in order to link the detected spectra to the 2-dimensional images of the observed objects. 64)
The spectrometer uses diffractive gratings to spatially separate the incoming light and analyze several objects simultaneously. The NIRSpec mechanism yields 6 different gratings and one prism to work with various spectral resolutions and in different ranges of the infrared spectrum. A TAM (Target Acquisition Mirror) allows allocation of the spectra and the corresponding stellar objects. These 8 optical elements are integrated on a GWA (Grating Wheel Assembly) as shown in Figure 31. It exchanges the diffractive optic within the instrument's beam path with high precision to allow correlation of different spectra taken from the same object.
To avoid the overlap of various orders of diffraction on the detector, a set of spectral filters was designed to select the desired wavelength range. These filters are mounted on a mechanism quite similar to the GWA. It moves one filter into the beam path to build a fitting combination of grating in use and preselected range of wavelength. This FWA (Filter Wheel Assembly) holds four edge filters and two band filters for various wavelengths, one clear filter for target acquisition and a mirror assembly for in-orbit calibration and pupil alignment during integration of the mechanism (Figure 32).
Mechanical alignment: Since both FWA and GWA are mechanisms actively influencing the beam path of the instrument, precise and repeatable alignment of the currently used optic, it is essential to ensure a stable image on the detector. Especially the GWA alignment is crucial since its optic works in reflection where every tilt of the optic is carried over directly into the alignment of the instrument. The FWA on the other hand uses planar elements working in transmission inducing but a fraction of their misalignment into an aberration of the beam (Ref. 64).
NIRSpec includes also an IFU (Integral Field Unit) device with the objective to study of the dynamics of high redshift galaxies. This device provides in addition a NIRSpec backup acquisition mode for spectroscopy. The IFU permits a 2-D spectral characterization of astronomical objects with unprecedented depths, especially in the 2-5 µm wavelength range. The IFU covers a FOV of 3 arcsec x 3 arcsec and provides five fixed slits for detailed spectroscopic studies of single objects. The NIRSpec-IFU is expected to be capable of reaching a continuum flux of 20 nJy (AB>28) in R=100 mode, and a line flux of 6 x 10-19 erg s-1 cm-2 in R=1000 mode at an SNR> 3 in an exposure period of 104 s.
The FPA (Focal Plane Array) consists of sub-units, each 2 k x 2 k, forming an array of 2 k x 4 k sampled at 100 marcsec (milliarcsecond) pixels. The detectors are thinned HgCdTe arrays (ASICs) built by the Rockwell Science Center and referred to as SIDECAR (System for Image Digitization, Enhancement, Control and Retrieval). Each of the two ASICs has 2048 x 2048 pixels, pixel size of 18 µm, pixel scale = 100 mas (micro arcseconds), the data are locally digitized. 65)
The NIRSpec also contains a calibration unit with a number of continuum and line sources.
Figure 33: Illustration of a MSA (Microshutter Array) assembly at left and the FPA SIDECAR ASIC at right, (image credit: NASA)
Multiobject spectroscopy: A special MEMS device, referred to as MSA (MicroShutter Array), is being developed at NASA/GSFC to be used as a programmable field selector for NIRSpec. The objective is to provide a means to observe numerous objects simultaneously and to eliminate the confusion caused by all other sources. MSA consists of microshutter arrays arranged in a 2 x 2 quadrant mosaic. Each quadrant represents a closely packed array of 175 x 384 of shutters each of which may be addressed independently - allowing only the light from objects of interest into the instrument. The MSA covers a FOV of 3.6 arcmin x 3.6 arcmin (each microshutter has a FOV of 0.2 x 0.4 arcsec) - allowing the simultaneous observation of about 100 objects.
The microshutters themselves are MEMS devices produced on a thin silicon nitride membrane on 100 µm x 200 µm pitch (spectral x spatial direction). They are actuated magnetically and latched and addressed electrostatically. The MSA object selection feature represents an enabling technology development with a first introduction in spaceborne astronomy. 66)
Figure 34: Schematic layout of the microshutter assembly (image credit: NASA, ESA)
The MSA microshutter array consists of ust under a quarter of a million individually controlled microshutters. By programming the array to only open those shutters coinciding with pre-selected objects of interest, light from these objects is isolated and directed to the spectroscopic stage of NIRSpec to produce the spectra.
Legend to Figure 35: The inspection light source is held by the technician at the front of the picture. Four array quadrants are located within the octagonal frame in the center of a titanium mosaic base plate.
The team, led by Principal Investigator Harvey Moseley of GSFC has demonstrated that electrostatically actuated microshutter arrays — that is, those activated by applying an specific voltage — are as functional as the current technology’s magnetically activated arrays. This advance makes them a highly attractive capability for potential Explorer-class missions designed to perform multi-object observations. 69)
Considered among the most innovative technologies to fly on the Webb telescope, the microshutter assembly is created from MEMS technologies and comprises thousands of tiny shutters, each about the width of a human hair. Assembled on four postage-size grids or arrays, the 250,000 shutters open or close individually to allow only the light from targeted objects to enter Webb’s NIRSpec, which will help identify types of stars and gases and measure their distances and motions. Because Webb will observe faint, far-away objects, it will take as long as a week for NIRSpec to gather enough light to obtain good spectra.
Figure 36: Alternate view of the NIRSpec instrument (ESA, NASA)
The NIRSpec instrument has a size of about 1.90 m x 1.3 m x 0.7 m and an estimated mass of about 196 kg.
Figure 37: Photo of the NIRSpec engineering test unit in Oct. 2009 (image credit: ESA)
The spectrograph structure is built from silicon carbide (SiC) - a monolithic ceramic providing the properties to meet the extremely high demands for dimensional stability and geometrical accuracy for the optical assembly. Geometrical distortions between NIRSpec and the ISIM, generated by very high temperature differences between cryogenic operational and ambient on ground environment are balanced by so called Kinematic Mounts made from titanium alloy. The need to exchange these parts without losing optical performance of the already aligned instrument led to the development of a highly sophisticated exchange procedure. 70)
The existing Kinematic Mounts already integrated on the Flight Model of NIRSpec were declared non-flight-worthy due to a detection of a manufacturing issue within the tapered areas, dedicated for flexural bending. Consequently a remanufacturing of the three OBKs (Optical Bench Kinematic Mounts) was decided and the development of an exchange philosophy considering all aspects of safety and technical requirements was developed in a joint team of ESA and Airbus Defence and Space.
Due to the detailed planning, preparation and practice, the actual exchange on the NIRSpec flight hardware was performed in five days without any procedure variation. The exchange was successfully performed as trained before.
The dye penetrant investigations performed in between the individual OBK exchange activities confirmed no damage of the SiC interfaces of the OBBP (Optical Bench Base Plate). These results were backed by acoustic monitoring which showed that no shock was introduced and no crack was initiated inside the SiC structure.
The results of the online optical measurements showed that the relative position and the PAR (Pupil Alignment Reference) remained stable within the measurement accuracy better than 3 acrsec angular and 10 µm relative PAR center displacement.
Status of NIRSpec:
• July 20, 2015: Engineers from Airbus and ESA (European Space Agency) work inside NASA Goddard Space Flight Center’s large clean room to remove the cover on Webb Telescope’s NIRSpec (Near InfraRed Spectrometer) instrument in preparation for the replacement of the MSA (Micro Shutter Array) and the FPA (Focal Plane Assembly). 71)
• Feb. 2015: The past two months have seen a team of engineers engaged in the intricate activity of replacing key components of the NIRSpec (Near InfraRed Spectrograph) on the James Webb Space Telescope. The instrument is now ready for the next series of extensive environmental tests devised to ensure that JWST's instruments can withstand the stresses and strains of launch and operation in space. 72) 73) 74)
- In the summer of 2014, the JWST Integrated Science Instrument Module (ISIM), fitted with all four instruments (NIRSpec, MIRI, NIRCam, and FGS/NIRISS), successfully completed cryogenic testing in a '24/7' campaign that lasted 116 days.
- However, the positive outcome of this important test campaign did not mean that ISIM and the instruments were ready for integration onto JWST's telescope. It has been known for over a year that additional work would be necessary to get some of the instruments into their final flight configuration. As a consequence, a period of a few months was allocated for these activities, immediately after the completion of the cryogenic test campaign.
- In particular, NIRSpec needed to have its detectors, microshutter assembly and optical assembly cover replaced. Also, the NIRCAM and FGS/NIRISS teams had to exchange some components in their instruments. MIRI was the only instrument that remained integrated with the ISIM. However, MIRI's configuration was also updated by installing the flight model cooler Cold Head Assembly (CHA) and exchanging some of the cooler lines and their supports.
- The first generation of JWST’s highly sensitive near-infrared detectors were found to suffer from a design flaw that resulted in a progressive degradation of their performance. New detectors have now been installed in all three near-infrared instruments.
- Another crucial component of NIRSpec are its MSA (Microshutter Assembly), a new technology developed for JWST by NASA. - One of the defining and pioneering features of NIRSpec is its ability to analyze the light from more than 100 astronomical objects at the same time. This is made possible by an assembly of four microshutter arrays, totalling almost a quarter of a million individual shutters.
- One of the defining and pioneering features of NIRSpec is its ability to analyze the light from more than 100 astronomical objects at the same time. This is made possible by an assembly of four MSAs, totalling almost a quarter of a million individual shutters.
- The cryogenic test revealed that several thousand of the individual microshutters had become inoperable and could not be opened. This susceptibility to acoustic noise was not expected and had gone undetected because of the difficulty of reproducing the environment to which the microshutters are actually subjected in this instrument. As a result of this problem, the performance of the microshutters in NIRSpec was strongly degraded. The NIRSpec Engineering Test Unit (ETU) provided the most realistic test environment for the MSA. These various tests provided a wealth of information that helped NASA to identify the cause of the 'failed closed' shutters issue.
- The new MSA contains three 'original design' arrays and one 'new design' array. In addition to most arrays being pre-screened at array level, the complete new MSA flight model was acoustically tested in the NIRSpec ETU before it was installed in the flight version of NIRSpec.
• April 4, 2014: An important milestone for JWST was passed on 25 March with the installation of the NIRSpec instrument on the ISIM (Integrated Science Instrument Module) at NASA/GSFC. All four science instruments are now in place on the ISIM, ready for the next series of tests. 75)
• Feb. 2014: The NIRSpec instrument is being installed on the ISIM (Integrated Science Instrument Module) at Goddard in preparation for an extensive series of tests with the full instrument complement. In addition, new detectors have been selected for NIRSpec, to be installed later this year. 76)
• Sept. 30, 2013: The NIRSpec instrument has arrived at the NASA/GSFC. 77)
• In early September 2013, the NIRSpec instrument, built by Astrium GmbH, was formally handed over to ESA. This marks an important milestone in Europe’s contribution to the JWST mission. Having undergone rigorous testing in Europe, NIRSpec will be shipped to NASA later this month for integration into JWST’s instrument module, followed by further testing and calibration as the whole observatory is built up. 78)
MIRI (Mid-Infrared Camera-Spectrograph)
MIRI is a joint instrument development of NASA and ESA. The instrument optics module and optical bench will be provided by the European MIRI Consortium funded by the ESA member states. NASA/JPL will provide the remainder of the instrument, notably the detector and cryostat subsystems. Within the joint instrument science team, Gillian S. Wright of the UKATC (UK Astronomy Technology Center), Edinburgh, is the PI of the European MIRI Consortium while George H. Rieke at the Steward Observatory of the University of Arizona (UA) is the MIRI PI for NASA. ESA coordinates the activities of the European MIRI Consortium (21 institutes from 10 countries) while EADS Astrium Ltd. functions as the main instrument contractor. The MIRI instrument has a mass of ~ 103 kg. 79) 80) 81) 82) 83) 84) 85) 86) 87)
Note: The ROE (Royal Observatory Edinburgh) comprises the UKTAC (UK Astronomy Technology Center) of the Science and Technology Facility Council (STSC), the Institute of Astronomy of the University of Edinburgh and the ROE Visitor Center.
Further participating European organizations in the MIRI project are: Astron, The Netherlands; CCLRC, Rutherford Appleton Laboratory (RAL), UK; CEA Service d'Astrophysique, Saclay, France; Centre Spatial De Liège, Belgium; CSIC (Consejo Superior de Investigaciones Científicas), Spain; DSRI (Danish Space Research Institute), Denmark; Dublin Institute for Advanced Studies, Ireland; IAS (Institut d'Astrophysique Spatiale), Orsay, France; INTA (Instituto Nacional de Técnica Aeroespacial), Spain; LAM (Laboratoire d'Astrophysique de Marseille), France; MPIA (Max-Planck-Institut fur Astronomie), Heidelberg, Germany; Observatoire de Paris, France; PSI (Paul Scherrer Institut), Switzerland; University of Amsterdam, The Netherlands; University of Cologne, Germany; University of Leicester, UK; University of Leiden, The Netherlands; University of Leuven, Belgium; University of Stockholm, Sweden.
As part of the European cooperation with NASA on the JWST program, MIRI was set up as a 50 : 50 partnership between ESA and NASA, with the European Consortium (EC) in charge of the optical bench assembly and the JPL (Jet Propulsion Laboratory) in charge of the detector system, the cooling system, and the flight software (Figure 38). In addition to the responsibilities shown, GSFC (Goddard Space Flight Center) provides the harness between the optical module and the ICE (Instrument Control Electronics). The formal delivery of the MIRI Optical System, including the detectors chain provided by JPL, to NASA is the responsibility of ESA.
In contrast to other science missions, where each scientific instrument has its own dedicated computer, on JWST there is one unit for all instruments where the flight software for each instrument resides – the ICDH (Instrument Control and Data Handling) electronics. Failure modes and event upsets are handled in this unit. The ICDH interfaces via an IEEE-1553B (MIL-STD-1553B) bus to the dedicated control electronics for the instrument mechanisms (ICE) and, via a remote services unit, for the FPE (Focal Plane Electronics) unit as shown in Figure 39.
MIRI's principal science objectives relate to the origin and evolution of all cosmic constituents, in particular to galaxy formation, star formation, and planet formation on a wide range of spatial and temporal scales. MIRI is to provide imaging, coronagraphy and low- and medium-resolution spectroscopy in the mid-infrared band (the 5-28 µm), representing a broad wavelength response in the thermal infrared. To achieve an optimized detection sensitivity, MIRI requires a high photon conversion efficiency as well as spectral and spatial passbands matched to the observation targets.
The MIRI design features an imager and a dual spectrometer (Figure 41). Light enters from the telescope through the IOC (Input Optics and Calibration) module. The IOC is part of the MIRI Optical Bench Assembly. It is designed to pick-off the MIRI field of view from the JWST Fine Steering Mirror and to relay the relevant parts of this FOV into the spectrometer and into the imager subsystems. The IOC additionally provides in-flight calibration fluxes to the imager and is mounted onto the MIRI primary structure (deck) and is operated at about 6 K. The IOC is being provided by CSL (Centre Spatial de Liege) of Liege University, Belgium.
The imager and the two spectrometer modules are based on all reflecting designs. The optical configuration of MIRI supports four science modes:
1) Photometric imaging in a number of bands from 5.6-25.5 µm within a FOV of 1.9 arcmin x 1.4 arcmin
2) Coronagraphy with a spectral range 10-27 µm in 4 bands (10.65, 11.4, 15.5, and 23 µm)
3) Low-resolution (R = 100) resolving power slit spectroscopy of single objects in the spectral range 5-11 µm
4) Medium-resolution (~100 km/s velocity resolution) integral field spectroscopy in the spectral range 5-28.5 µm over FOVs growing with wavelength from 3.5 x 3.5 to 7 arcsec x 7 arcsec.
Figure 40: The MIRI optics module (image credit: MIRI consortium)
The optical concept splits the instrument into two separate channels operating over the 5 to 28 µm wavelength range, one for imaging (over a 1.9 x 1.4 arcmin FOV) and one for medium resolution spectroscopy (up to 8 x 8 arcmin FOV). The functional split into two parts was chosen because it was found that it simplified the internal optical interfaces, and the complexity of the layout and of the mechanisms. Both the imager and spectrometer channels are fed by common optics from a single pick-off mirror placed close to the telescope focal plane, and fed also by a common calibration subsystem. - The pick-off mirror in front of the JWST OTE focal plane directs the MIRI FOV towards the imager. A small fold mirror adjacent to the imager light path picks off the small (up to 8 x 8 arcsec) FOV of the spectrometer. A second tilting fold in the spectrometer optical path is used to select either light from the telescope or from the MIRI calibration system.
The MIRI spectrometer is comprised of two parts, the SPO (Spectrometer Pre-Optics), built by UKATC, and the SMO (Spectrometer Main Optics), built by Astron, The Netherlands. The two parts of the spectrometer combine together using a spectrograph filter wheel which is made by MPIA (Max Planck Institute of Astronomy). The SPO houses the image slicers and the dichroic/grating wheels. Light enters the SPO directly from the IOC. Light passes from the image slicer, through a series of mirrors, to the FPM. The FPM in turn is located in the SMO. 88) 89)
Figure 42: Main optics of the MIRI spectrometer (image credit: MIRI European Consortium)
Figure 43: Illustration of the SPO (image credit: MIRI European Consortium)
The light is divided into four spectral ranges by the dichroics, and two of these ranges are imaged onto each of the two detector arrays. Along the way to the appropriate array, the light is dispersed by a diffraction grating. The gratings are mounted on mechanical turrets with three for each spectral range. A full spectrum is obtained by taking exposures at the three settings of each mechanical turret - the turrets are ganged together and operated with a single mechanism, and the dichroics allow the same spot on the sky to be distributed to all four spectrometer arms. Thus, only three exposures are required to obtain a complete spectrum.
Table 9: Summary of imager channels
The imager module has a combined FOV for the imager and coronagraph/low-resolution spectrometer modes. The coronagraph masks are placed at a fixed location on one edge of the imager field.
Figure 44: Schematic configuration of the MIRI imager module (image credit: MIRI European Consortium)
Figure 45: Illustration of the MIRI imager (image credit: MIRI European Consortium)
Figure 46: Illustration of the coronagraph (image credit: MIRI European Consortium)
The instrument uses phase mask coronagraphs. They reject the light of a central source by introducing phase shifts using a quadrant-design plate at the instrument input focal plane. These shifts cause the light from the source to interfere destructively at the detector array. Unlike conventional occulting Lyot coronagraphs, phase plates allow measurements to be obtained very close to the central object. Further from the central object, they provide performance similar to that of a conventional occulting coronagraph. The 4-quadrant phase mask is dividing an Airy disk (image of a point source) in the center of the field into 4 domains; and it applies a phase difference of p to two of them, so that the image is eliminated by destructive interference.
The dichroic filter wheel comprises three working positions to move gratings and dichroics simultaneously. Each is located on separate wheel discs. The two wheels feed light in to the four spectrometer channels inside MIRI.
Figure 47: Scheme of the spectrograph filter wheel (image credit: MIRI European Consortium)
Figure 48: Illustration of the dichroic wheel (image credit: MIRI European Consortium)
The filter wheel has 18 positions: 10 imaging filters, 4 coronagraphic diaphragms/filters, 1 neutral density filter, 1 double prism, 1 lens and 1 clear/blind position (counterweight of prism). The system has to operate in the cryo-vacuum of 7 K up to 10 years. The design is of ISOPHOT wheel mechanisms heritage flown on ESA's ISO (Infrared Space Observatory) mission. The filter wheel assembly houses a wheel disc carrying all the optical elements. Rotation is realized by a central two-phase torque motor (allows for bi-directional movement).
Figure 49: Illustration of the filter wheel (image credit: MIRI European Consortium)
The FPS (Focal Plane System) consists of three FPM (Focal Plane Module) units (two in the spectrometer and one in the imager), a single FPE (Focal Plane Electronics) unit, and a set of low noise FPE/FPM cryogenic harnesses that connect the FPMs to the FPE. Each FPM houses a single SCA (Sensor Chip Assembly) containing a 1024 x 1024 Si:As IBC detector array and readout electronics. The IBC (Impurity Band Conduction) technology of Raytheon Vision Systems has been selected for very sensitive, cryogenically cooled infrared detectors. These arrays are manufactured as a hybrid structure, referred to as SCA (Sensor Chip Assembly), consisting of a detector array connected with indium bumps to a ROIC (Readout Integrated Circuit). The Si:As IBC detector material offers the highest performance for longwave detection in low-background systems. 90) 91)
Table 10: Overview of expected MIRI sensitivities
Figure 50: Schematic of the silicon detector array (image credit: JPL)
Figure 51: The FPM of MIRI (image credit: JPL)
MIRI cryocooler: The MIRI instrument (optical bench, all focal planes) is cooled to ~7 K by a super-frigid mechanical helium cryocooler system of NASA/JPL built by NGAS (Northrop Grumman Aerospace Systems), Redondo Beach, CA. The cryocooling is achieved by means of a cryostat. Two hydrogen vessels are being used, the larger one for the optical bench, and the smaller one for the detectors. The vessels are designed to hold 1000 liter of solid hydrogen at 7 K.
Active cooling is provided by a dedicated three stage Stirling-cycle PT (Pulse-Tube) to precool a circulating helium flow loop, with a Joule-Thomson (JT) expansion stage to provide continuous cooling to 6.2 K to a single point on the MIRI optical bench. Significant development of the cryocooler occurred as part of the ACTDP (Advanced Cryocooler Technology Development Program) prior to selection as the flight cryocooler for MIRI. 92) 93) 94)
Figure 53: Illustration of the MIRI cryocooler elements (image credit: NGAS, UA, Ref. 87)
Legend to Figure 54: The drawing on the left side shows the spacecraft bus (bottom) and the OTE. The CCA (Cooler Compressor Assembly) and the CHA (Cold Head Assembly) are shown as expanded CAD renderings on the right hand side. The CCA is shown in context of the spacecraft bus and tower structures in the immediate vicinity. The CCE (Cryocooler Control Electronics) and the CTA (Cooler Tower Assembly) are not shown.
Status of MIRI:
• Feb. 2014: MIRI has performed beautifully during its first cryo-vacuum test campaign carried out at NASA's Goddard Space Flight Center towards the end of 2013. An examination of data recorded during those tests confirms that the instrument is in good health and performing well. 95)
• July 2013: The ISIM, with the two instruments (MIRI and FGS/NIRISS), is now being prepared for the first series of cryogenic tests, planned for later this summer. These will include optical, electrical and electromagnetic interference tests, all under cold vacuum conditions. The tests will be conducted in the SES (Space Environment Simulator) vacuum chamber at GSFC. 96)
• On April 29, 2013, MIRI was the second instrument to be installed into the ISIM (after FGS/NIRISS).
• MIRI arrived at GSFC on 28 May 2012, having been despatched from the Rutherford Appleton Laboratory in the United Kingdom, where it had been assembled. Engineers from ESA, the MIRI European Consortium and NASA were on hand to take delivery of this, the first of JWST's four instruments to arrive at GSFC.
FGS (Fine Guidance Sensor):
The FGS is a sensitive camera that provides dedicated, mission-critical support for the observatory's ACS (Attitude Control System). The camera can image two adjacent fields of view, each approximately 2.4 arcmin x 2.4 arcmin in size, and can also be configured to read out small subarrays (8 x 8 pixels) at a rate of 16 times/s. Even with these short integration times, the FGS is sensitive enough to reach 58 µJy at 1.25 µm (~Jab = 19.5). This combination of sky coverage and sensitivity ensures that an appropriate guide star can be found with 95% probability at any point in the sky, including high galactic latitudes.
1) To obtain images for target acquisition. Full-frame images are used to identify star fields by correlating the observed brightness and position of sources with the properties of cataloged objects selected by the observation planning software.
2) To acquire preselected guide stars. During acquisition, a guide star is first centered in an 8 x 8 pixel window. Small angle maneuvers are then executed to translate this window to a pre-specified location within the FOV, so that an observation with one of the science instruments will be oriented correctly.
3) To provide the ACS with centroid measurements of the guide stars at an update rate of 16 Hz. These measurements will be used to enable stable pointing at the milli-arcsecond level.
Note: In the course of building and testing of the TFI (Tunable Filter Imager) flight model, numerous technical issues arose with unforeseeable length of required mitigation effort. In addition to that, emerging new science priorities caused that in summer of 2011 a decision was taken to replace TFI with a new instrument, called NIRISS (Near Infrared Imager and Slitless Spectrograph). 99) 100)
FGS/NIRISS (Near-Infrared Imager and Slitless Spectrograph):
FGS is one of the four science instruments on board the JWST, a contribution of CSA (Canadian Space Agency). The FGS-NIRISS science team is jointly led by John Hutchings of NRC (National Research Council) of Canada, Victoria, British Columbia, Canada and René Doyon, University of Montréal. - The FGS consists of two Guider channels and one Near-Infrared Slitless Spectrometer (NIRISS) channel. COM DEV Space Systems of Ottawa Canada is CSA’s prime contractor for the FGS instrument. The NIRISS channel makes use of grisms and filters optimized for first-light science and exo-planet observations. This is a recent change in the configuration of the instrument which until the summer of 2011 made use of a tunable filter. The block diagram of the updated instrument configuration is shown in Figure 55. 101) 102)
The FGS prime function is to work with the ACS (Attitude Control Subsystem) of the Observatory to provide fine guiding. The guiding side of FGS (FGS-Guider) is a near-infrared (IR) camera operating in broadband light over the full 0.6-5 µm bandpass of its two Hawaii-2RG detectors. The FGS-Guider features an all reflective optical design with two redundant 2.3 arcmin x 2.3 arcmin FOV each capable of reading a small (8 x 8) subarray window to select any star in the FOV and to report its centroid every 64 ms (16 Hz) to the ACS, which in turn sends an error signal to the fine steering mirror of the telescope. At this sampling rate, the FGS-Guider is required to have a NEA (Noise Equivalent Angle) less than 4 marcsec (one axis) on a star with an integrated signal of 800 electrons, equivalent to approximately a JAB = 19:5 star. This limiting magnitude guarantees more than 95% of the sky coverage with at least three stars within the FGS-Guider FOV. 103) 104)
FGS features two modules: an infrared camera dedicated to fine guiding of the observatory and a science camera module, the NIRISS (Near-Infrared Imager and Slitless Spectrograph) covering the wavelength range between 0.7 and 5.0 µm with a FOV of 2.2 arcmin x2.2 arcmin.
A schematic optical layout of NIRISS is shown in Figure 56. The optical design is an all reflective design with gold-coated diamond-turned aluminum mirrors. The average WFE ( Wavefront Error) over the FOV of the instrument (telescope excluded) is less than 79 nm RMS.
Figure 56: NIRISS optical layout. The NIRISS optical configuration is identical to the old TFI one except that the etalon is no longer present and that the dual wheel has been repopulated with new filters and grisms as shown in Figure 57 (image credit: CSA, ComDev Ltd.)
NIRISS has a dual pupil and filter wheel assembly. Collimated light first passes through a selected position in the pupil wheel and then through the selected position in the filter wheel. Figure 57 shows the elements of the pupil and filter wheels. The PAR (Pupil Alignment Reference) shown in Figure 1 is used during ground testing to verify the positioning of NIRISS in the ISIM (Integrated Science Instrument Module). Its presence decreases the throughput of the "CLEARP" element by about 10%. 105)
The Dual Wheel is comprised of pupil and filter wheels, bearings, gears, static hub, rear motor/resolver plate and the support bracket. The equipment includes drive motors, resolvers and variable reluctance sensors. Each wheel (~280 mm diameter) is capable of rotating the optical elements to one of 9 desired positions, supported by a preloaded duplex pair of angular contact bearings. All moving parts use MoS2 dry lubricants compatible with the cryogenic environment. A stepper motor with a single-stage planetary gearhead is used to drive each wheel independently, through a reduction gear train. The optical parts are held in place by a metallic spring gasket with a precision holder machined from Ti 6Al-4V ELI annealed, stress-relieved prior to final machining and cryo-cycled prior to installing optical elements. A black tiodize coating is used for stray light control. 106) 107)
Detector: The NIRISS detector consists of a single SCA (Sensor Chip Assembly) with the following characteristics:
- 2048 x 2048 pixel HgCdTe array. Each pixel is 18 microns on a side.
- Dark rate: < 0.02 e-/s
- Noise: 23 e- (correlated double sample)
- Gain: 1.5 e-/ADU
- 2.2 arcmin x 2.2 arcmin FOV
- Plate scale in x: 0.0654 arcsec/pixel; plate scale in y: 0.0658 arcsec/pixel
• The 2048 x 2048 pixels of the SCA are divided into 2040 x 2040 photosensitive pixels and a 4-pixel wide border of non-photosensitive reference pixels around the outside perimeter. The reference pixels do not respond to light, but are sampled and digitized in exactly the same way as the light sensitive pixels. The reference pixels can be used to monitor and remove various low-frequency bias drifts.
• The composition of the detector is tuned to provide a long-wavelength cutoff at approximately 5.3 microns.
• The SCA is fabricated and packaged into a FPA (Focal Plane Assembly ) that includes a HAWAII-2RG readout integrated circuit (ROIC), which is controlled by a SIDECAR ASIC (Application Specific Integrated Circuit). The ASIC is a custom-built chip that clocks the array, sets the bias voltages, and performs the analog-to-digital conversion of the pixel voltages.
• The SCA is fabricated and packaged into a focal-plane assembly (FPA) that includes a HAWAII-2RG readout integrated circuit (ROIC), which is controlled by a SIDECAR Application Specific Integrated Circuit (ASIC). The ASIC is a custom-built chip that clocks the array, sets the bias voltages, and performs the analog-to-digital conversion of the pixel voltages.
• A full-frame read of the SCA is digitized through four readout amplifiers. Each amplifier reads a strip that is 512 x 2048 pixels. 108)
Figure 58: Schematic view of the NIRISS SCA (image credit: STScI)
Observation modes: NIRISS has four observing modes (Ref. 103):
1) BBI (Broadband Imaging) featuring seven of the eight NIRCam broadband filters
2) Low resolution WFSS (Wide-Field Slitless Spectroscopy) at a resolving power of ~150 between 1 and 2.5 µm
3) Medium-resolution SOSS (Single-Object Spectroscopy). The single-object cross-dispersed slitless spectroscopy enabling simultaneous wavelength coverage between 0.7 and 2.5 µm at R~660, a mode optimized for transit spectroscopy of relatively bright (J > 7) stars
4) sparse AMI (Aperture Interferometric Imaging) between 3.8 and 4.8 µm enabling high-contrast (~ 10-4) imaging of M < 8 point sources at angular separations between 70 and 500 marcsec.
Broadband imaging: NIRISS offers the same broadband imaging capability as NIRCam except that NIRISS does not carry the NIRCam F070W filter. The new blocking filters procured for NIRISS, used in combination with NIRCam short wavelength fitters, have measured inband transmission of 95% typically. As shown in Figure 59, NIRISS and NIRCam are predicted to have similar sensitivities within 10%. This sensitivity calculation takes into account the coarser pixel sampling (65 marcsec) of NIRISS at short wavelengths compared to NIRCam (32 marcsec). NIRISS is not expected to be used for broadband imaging unless parallel observing is eventually offered by the Observatory. If so, NIRISS could be easily used in parallel with NIRCam for a wide variety of programs including deep extragalactic surveys aiming at probing the galaxy population of the early universe.
WFSS (Wide-Field Slitless Spectroscopy): The WFSS mode of NIRISS operation is optimized for Ly α emitters (1-2.5 µm) and makes use of a pair of grisms GR150V and GR150H. In order to break wavelength-position degeneracy two prisms are at 90º angle to each other and are used in two separate imaging sessions. In this scheme, the intersection of the two perpendicular dispersion lines indicates undeviated wavelength and true sky position of the source.
It is implemented through the two GR150R & GR150C grisms operated in slitless mode at R = 150 (2 pixels), enabling low-resolution multi-object spectroscopy between 1 and 2.5 µm in first order. The grisms are resin-replicated on a low refractive index material (Infrasil 301) to minimize Fresnel loss. They were manufactured by Bach Research. The peak efficiency of a flight-like GR150 grism, i.e. manufactured with the same replication process (same substrate prism, same master), was measured to be ~80% (see Figure 60). Wavefront error measured at 90 K on both grism surfaces showed some distortion due to stress induced by CTE (Coefficient of Thermal Expansion) mismatch between the resin and the glass substrate. However, within uncertainties, the distortion was measured to be identical on both sides at 90 K. This distortion effectively turns the grism into a weak meniscus lens which, to first order, has no defocus. Cryogenic (90 K) monochromatic PSF measurements were also secured to estimate the TWFE (Transmitted Wavefront Error) of the GR150 grisms; the results indicate that they should have less than 30 nm (RMS) of TWFE. The image quality in the WFSS mode is therefore expected to be as good as in broadband imaging i.e. with a typical Strehl ratio of ~0.5 at 1.3 µm.
SOSS (Single-Object Slitless Spectroscopy): This mode of NIRISS operation is optimized for relatively bright stars (e.g. exoplanet transiting systems) in 0.6-2.5 µm spectral range in the first order of dispersion. It is based on a GR700XD grism made of the directly ruled ZnSe. A ZnSe cross-dispersion prism is placed in front of the grism for an optimal separation of the first and second order spectra.
To optimize this mode for very high signal-to-noise ratio observations of bright objects, the entrance face of the ZnSe prism has a built-in cylindrical weak lens that defocusses the spectrum over ~25 pixels along the spatial direction, keeping the point spread function nearly diffraction-limited in the spectral direction. As a result, the spectrum is undersampled at most wavelengths along the spectral direction which, given the non-uniform detector pixel response in the presence of pointing jitter noise, constitutes a potential source of systematic effect for achieving high-precision differential spectrophotometry. To mitigate/minimize this problem, the GR700XD grism is slightly rotated by ~ 2º with respect to the detector. Given that the PSF (Point Spread Function) is spread over 25 pixels in the spatial direction, this rotation effectively provides Nyquist sampling at all wavelengths. Furthermore, since the GR700XD grism is operated in slitless mode, there are no flux variations induced by a slit. All these features, designed for achieving high-precision differential spectrophotometry, combined with the very stable thermal environment expected at L2, will make the NIRISS SOSS mode a powerful capability for atmospheric characterization of transiting exoplanets.
Legend to Figure 61: The dashed line is the predicted NIRSpec sensitivity for the multi-slit low-resolution (R ~100) mode; the solid circles superimposed on the dashed line is the spectral resolution of NIRSpec at that wavelength. The green triangle is the sensitivity that TFI would have had at its shortest wavelength (1.45 µm; zLyα = 10:9); TFI would have been typically a factor ~3 more sensitive than NIRISS at the expense of sampling a very narrow redshift range at a given wavelength and limited to probe zLyα > 10:9.
AMI (Aperture Masking Interferometry): The NIRISS PW includes a seven-aperture non-redundant mask (NRM; Figure 62) used for aperture masking interferometry (AMI). The AMI technique enables high-contrast imaging at inner working angle theoretically as small as 1 λ/2D. This mode is particularly appealing for faint companion detection (brown dwarfs & exoplanets) around relatively bright stars. AMI has been successfully used on the ground for a variety of applications, for example to unveil the spiral structure of the stellar wind of the Wolf-Rayet star WR98A (Monnier et al. 1999), detect brown dwarfs (Lloyd et al., 2006) and to put mass limits on the presence of brown dwarfs and exoplanets within the inner 10 AU of the multi-planetary system HR8799.
The main scientific application of AMI with NIRISS is for high-contrast imaging of point sources but it can also be used for aperture synthesis applications like probing the inner structure of nearby active galactic nuclei. For the former, simulations suggest that contrast of ~ 2 x 10-4 within one λ/D at 4.3 µm should be achieved on a M = 8 star in 104 seconds. This level of contrast is sufficient to detect 5-10 MJup gas-giant exoplanets around bright nearby young (10-100 Myrs) stars. For comparison, contrast at the level of ~ 10-3 within one λ/D at L0 has been achieved on Keck. Since AMI is particularly sensitive to amplitude errors, a space-based environment is ideal for AMI. The NIRISS simulations take into account the instrumental effect of bad pixels, intra-pixel response and flat field errors and assume one calibrator/reference star; using more than one calibrator should improved the performance. As seen in Figure 12, AMI is probing a unique discovery space between 70 and 500 marcsec which is very complementary to NIRCam and MIRI, both virtually "blind" to companions at separations less than ~0.5 arcsec.
Figure 63: Five sigma contrast curve predicted for the NIRCam/MIRI coronagraphs and the NIRISS/AMI mode. AMI is probing relatively small inner working angles (image credit: CSA, COM DEV Ltd.)
Table 11: Summary of NIRISS filter, grism and mask configurations for different modes of operation (Ref. 99)
FGS/NIRISS integration and status:
• August 27, 2015: Preparations for the third cryo-vacuum test (CV3) of the ISIM (Integrated Science Instrument Module) at NASA’s Goddard Space Flight Center continued throughout the summer. For the first time, the flight configuration of the ISIM was vigorously shaken – not stirred! – and bombarded by intense acoustical waves to simulate the harsh conditions of launch. Both NIRISS and FGS sailed through their “system functional tests” before and after these perturbations with no issues. Additional tests to confirm the electromagnetic compatibility of the subsystems of ISIM under conditions that simulate normal operations were also completed successfully. Now that the robustness of the ISIM has been demonstrated, it’s “full speed ahead” for the beginning of CV3 in late October! 109)
• Feb. 12, 2015: FGS/NIRISS became the first instrument to be reinstalled in the ISIM (Integrated Science Instrument Module) following the "Half-Time Show." All the planned hardware changes were successfully completed and both instruments passed their electronic check-outs at room temperature with flying colors. FGS/NIRISS is ready for the final series of tests at NASA's Goddard Space Flight Center! 110)
• Oct. 29, 2013: NIRISS completed its first suite of tests under cryogenic conditions in the large vacuum chamber at NASA's Goddard Space Flight Center. The tests featured "first light" observations for all the observing modes of NIRISS. Although a few glitches occurred, initial analysis of the test data show that NIRISS is performing marvelously.
• March 1, 2013: NIRISS and the FGS became the first flight instruments to be attached to the ISIM (Integrated Science Instrument Module), which is currently located in the large clean room at NASA/GSFC (Ref.98).
• Dec. 21, 2012: NIRISS and the FGS successfully completed room-temperature functional tests at NASA/GSFC.
• Nov. 15, 2012: NIRISS and the FGS became the first JWST instruments to be accepted formally by NASA during the Delivery Review Board meeting at the Goddard Space Flight Center.
• The Canadian Space Agency delivered NIRISS and the Fine Guidance Sensor to NASA's Goddard Space Flight Center on July 30, 2012.
• The end-to-end functional and performance cryogenic vacuum testing of NIRISS was successfully completed at the beginning of 2012. The new, compared to TFI, components of the Dual Wheel went through separate qualification process afterwards.
Legend to Figure 64: The left image shows the components of FGS. Light from the telescope is redirected by the POM (Pick-Off Mirror), and refocused by the TMA (Three-Mirror Assembly) onto the Fine Focus Mechanism before entering the detector assembly. The FGS has two detectors, called FPAs (Focal Plane Assemblies), which record the light . — The right image shows the components of NIRISS. Light from the telescope is redirected into NIRISS by its Pick-Off Mirror. The collimator makes the light rays parallel to each other so they pass correctly through various combinations of filters or light-splitting grisms in the Pupil and Filter Wheel. Finally, the light is focused by the camera onto the detector (Ref. 100).
Figure 65: FGS full instrument level test (image credit: CSA, COM DEV Ltd., Ref. 108)
Figure 66: Photo of the fully assembled NIRISS (bottom) and FGS-Guider (image credit: CSA, NASA) 111)
Spacecraft bus and sunshield
The JWST spacecraft bus provides the necessary support functions for the operation of the JWST observatory. The bus is the home for six major subsystems: 112)
• ACS (Attitude Control Subsystem)
• EPS (Electrical Power Subsystem)
• C&DHS (Command and Data Handling Subsystem)
• RF communications subsystem
• Propulsion subsystem
• TCS (Thermal Control Subsystem)
The spacecraft is 3-axis stabilized. Two star trackers (+ 1 for redundancy) point the observatory toward the science target prior to guide star acquisition, and they provide roll stability about the telescope line of sight (V1 axis.) Six reaction wheels (two are redundant) are mounted on isolators near the center of gravity of the bus to reduce disturbances to the observatory. These reaction wheels offload the fine steering control (operation from a 16 Hz update from the FGS) to maintain the fine steering mirror near its central position to limit differential distortion-induced blurring onto the target star. 113) 114)
Figure 67: Top view of the JWST spacecraft bus (image credit: NASA)
Figure 68: Observatory schematic block diagram (image credit: NASA)
A propulsion subsystem, containing the fuel tanks and thrusters, is used to support trajectory maneuvers to L2 and to maintain the halo orbit at L2.
The avionics design of JWST employs the FPE (Focal Plane Electronics) onboard network which uses the SpaceWire specification and a transport layer (not part of SpaceWire). SpaceWire is used to provide point‐to‐point links to ISIM (Integrated Science Instrument Module). A MIL‐STD‐1553 data bus is being used to communicate with the ICEs (Instrument Control Electronics) of each instrument, and FGS (Fine Guidance Sensor).
Figure 69: Various FM (Flight Model) and EM (Engineering Model) components of the JWST spacecraft (image credit: NASA, Ref. 40)
RF communications: JWST will be using CCTS (Common Command and Telemetry System), a modified multimission COTS system of Northrop Grumman which is based on Raytheon's ECLIPSE product line (Raytheon was responsible for developing this system for Northrop Grumman. ECLIPSE is a commercial off-the-shelf command and telemetry product that is configured to support both satellite flight operations and integration and test for JWST. 115)
Onboard storage is provided by a solid-state recorder with a capacity of 58.9 GB (manufacturer: SEAKR Engineering, Inc.). Operating like a digital video recorder, the spacecraft flight unit records all science data together with continuous engineering "state of health" telemetry for the entire observatory 24 hours a day, seven days a week. The data is downloaded to the ground station when the telescope communicates with Earth during a four-hour window every 12 hours. 116)
A high gain antenna provides Ka-band and S-band communications. The Ka-band downlink from L2 is used for science data at the selectable rates of 7, 14, or 28 Mbit/s. A pair of omni-directional antennas (S-band) provide near hemispherical coverage for emergency communications. The S-band nominal downlink is 40 kbit/s and the uplink is 16 kbit/s.
Note: Unlike Hubble, JWST was never meant to be repaired. But in May 2007, NASA announced that it is considering installing a grapple attachment anyway, just to be safe.
Figure 70: JWST communications system architecture (image credit: NASA) 117)
The sunshield provides a very stable passively cooled cryogenic environment to the OTE and ISIM instrumentation - taking full advantage of the steady thermal conditions of the JWST halo orbit at L2. Thermal stability is further enhanced by the two-chord fold architecture of the primary mirror. The folding architecture allows simple thermal straps across the hinge lines and results in a uniform temperature distribution on the primary mirror structure. With these features, the observatory can maintain its optical performance and optical stability for any pointing within its FOR (Field of Regard) without relying on active thermal control or active wavefront control. The sunshield deployment concept is based on Northrop Grumman's precision antenna mesh system. 118) 119)
The FOR (Field of Regard) is the region of the sky in which observations can be conducted safely at a given time. For JWST, the FOR is a large annulus that moves with the position of the Sun and covers about 40% of the sky at any time. This coverage is lower than the ~80% that is accessible by Hubble. The FOR, as is shown in Figure 71, allows one to observe targets from 85º to 135º of the Sun. Most astronomical targets are observable for two periods separated by 6 months during each year. The length of the observing window varies with ecliptic latitude, and targets within 5º of the ecliptic poles are visible continuously, and provides 100% accessibility of the sky during a year period. The sunshield permits the observatory to pitch toward and away from the sun by approximately 68º, while still keeping the telescope in the shade (Figure 72). The continuous viewing zone is important for some science programs that involve monitoring throughout the year and will also be useful for calibration purposes. Outside the continuous viewing zone every area in the sky is observable for at least 100 days per year. The maximum time on target at a given orientation is 10 days.
Figure 71: Schematic of observatory FOR (image credit: STScI, Ref. 34)
The sunshield has dimensions of about 20 m x 14 m providing ample shielding from light of the sun and the Earth. The sunshield provides a 5 layer, ”V” groove radiator design of lightweight reflecting material. It reduces the 300 kW of radiation it receives from the sun on its sunward side, to a mere 23 mW (milliwatt) at the back, sufficient to sustain a 300 K temperature drop from front to back. With a back sunshield temperature of ~ 90 K, the primary mirror, the optical truss, and the instrument payload can radiate their heat to space (at 2.7 K) and reach cryogenic temperatures of 30-50 K. These low temperatures and the total blocking of direct or reflected sunlight are crucial to the scientific success of JWST. 120)
The five sunshield layers of ultra-thin membrane are constructed from DuPont Kapton® E. The first layer, at the hot side, is 50.8 µm thick. The remaining four layers are each 25.4 µm thick, similar in thickness to a human hair. The membranes use a vapor-deposited aluminum coating to produce a highly reflective surface and can sustain a 300 K temperature drop. Z-folded at launch, the sunshield will be signaled to begin deploying two days into launch, as the spacecraft heads toward its orbit. 121)
Figure 73: The five-layer finite element model of the JWST sunshield (image credit: NGAS)
Historically, membranes have been designed to induce a biaxial-tension stress state, thus guaranteeing that wrinkles do not form. The large-scale geometry of the JWST sunshield, along with its complex design features, may hinder such a biaxial stress state. Therefore, the ability to accurately predict the response of the membrane becomes critical to mission success. This article addresses the analytical problems involved in meeting those objectives and looks ahead to the challenges remaining in manufacturing the sunshield.
Figure 74: Overview of the JWST sunshield analysis process (image credit: NGAS)
Figure 75: Deployed observatory, back view: Spacecraft bus, solar arrays, communications antenna, and ISIM (image credit: NGAS)
Table 12: Overview of JWST mission parameters 122)